One of the things that cannot be missing in your home if you have a good collection of classic consoles is a television that has analog connections. The retro consoles that marked our youth so much used component connections, those white, red, and yellow connectors that, no matter how hard you look for them, are not found on the most modern televisions. If you like connect a console like PlayStation 2 to a Smart TVYou probably have a few questions. Can anything be done to connect the PS2 to a modern TV via HDMI? Well, let's try to solve that doubt.
Can the PS2 be connected to a TV via HDMI?
Modern televisions don't get along quite well with analog technology. The VGA and component connections they are totally banished from the new Smart TVs. It is true that there was a small transition period in which some televisions were sold that had the best of both worlds, but those models are no longer on the market.
If you have just taken your old PlayStation 2 out of the box in which you kept it and you want to play one of its mythical games again, you will be wondering what you have to do to connect it to your modern television. Well, yes you can make the connection, although the thing has a bit of science.
Method 1: PS2 2 HDMI
So that you can use your PlayStation 2 on a modern television, you have to convert the analog video signal to a digital image before it reaches the television. There are several ways to do it, but the simplest you will find is a adapter type 'PS2 2 HDMI'.
These adapters are quite affordable. They are placed directly on the video output of the console. At the other end of the dongle, the device has a HDMI slot and a 3,5 mm jack headphone output.
The converters have prices that rarely reach 30 euros, so they are a fairly cheap solution to solve this problem that occurs with modern televisions. These that we show you below are the best known:
Link for PS2 2 HDMI
OK under 20 euros, and is one of the best-selling models in the entire market. You can offer output with 480p, 480i and 576i resolution. The pack includes a one-meter HDMI cable.
This model is quite well known, but it can only work in one mode. If you want to be able to switch between RGB and YPbPr, we will show you an alternative in the next section.
See offer on AmazonProzor PS2 to HDMI RGB + YPbPr Adapter
It is a slightly more expensive model than the previous one, but it guarantees a conversion of the PlayStation 2 signal to a digital television without loss.
The most interesting thing about this dongle is that it has two different ways. We will connect the device to the video output of the PS2 and then we will put the HDMI cable from the adapter to the TV. The Prozor adapter has a button that allows you to change the video mode. The mode YPbPr is the one that gives the best image quality, but it can also be set to RGB mode.
The quality of materials of this adapter is quite good, and it allows heat to be dissipated well, so we will not have cuts during transmission. Regarding resolutions, admits 480i, 480p and 576i.
See offer on AmazonOption 2: RCA to HDMI Adapter
The method that we have seen in the first section is not bad at all, but it has a small drawback. In this post we are only talking about the PlayStation 2, but… am I really going to have to buy a separate adapter for each analog console I have at home? Not necessarily. With a RCA to HDMI adapter, you will be able to use both the PlayStation 2 and any other console that you have stored there.
The operation of this type of adapters is also very simple. On the input side they have the connectors for components lifelong. And at the other end is a HDMI output. With this you will not only be able to connect the PlayStation 2, but you will also be able to rediscover consoles like the GameCube, the Wii or even the original PlayStation.
As usual in these cases, the quality of dongle It will greatly influence your user experience. The cheapest models can heat up and cause the odd problem if we play very long games during summer days. Here we show you a few of these devices:
QGECEN RCA to HDMI
This model is quite affordable and is the best seller on Amazon. Supports output with a maximum resolution of 1080p at 60 Hz, so you will have a better bandwidth than with other proposals.
As you will be able to see in the Amazon comments, it is quite an adapter. reliable, and users consider that it does its job quite well with both the PlayStation 2 and other more recent consoles that still used this type of connections (like the PS3), which can take advantage of Full HD resolution.
See offer on AmazonEASYCEL Component to HDMI Converter
If you are still looking for a product more complete, this EASYCEL brand adapter is one of the most interesting you will find to connect old consoles to your modern television, as well as any other type of retro device.
The maximum output resolution of this adapter is Full HD at 50 or 60Hz. It is worth a little more expensive than the model that we have presented to you at the beginning of this section, but it has very good ratings and is a more complete product both due to its number of connections and the level of materials that have been used to manufacture the device.
See offer on Amazon
The links to Amazon in this article are part of our agreement with their Affiliate Program and may earn us a small commission on their sale (without affecting the price you pay). Even so, the decision to publish and add them has been made, as always, freely and under editorial criteria, without attending to requests from the brands involved.